| Process | NO. | Material | Material model | Material characteristics | Details description |
| Stamping | 20 | Aluminium | AL 1100 | Corrosion resistance, good plasticity, and low density. | This material is part of the pure aluminum sheet series, with relatively low strength and excellent ductility, formability, weldability, and corrosion resistance. Anodizing can further enhance corrosion resistance while providing an aesthetically pleasing surface. However, it cannot undergo heat treatment for strengthening. It is commonly used in utensils, heat sinks, bottle caps, printing plates, building materials, heat exchanger components, and can also be used for products requiring deep stamping. |
| Stamping | 21 | Aluminium | AL 3003 | Good weldability, corrosion resistance, and good ductility. | This is a rust-resistant aluminum, and the strength of this alloy is not high (slightly higher than industrial pure aluminum). It cannot undergo heat treatment for strengthening, so cold working methods are employed to enhance its mechanical properties. It is mainly used for applications that require high plasticity and good weldability in low-load parts operating in liquid or gas environments. |
| Stamping | 22 | Aluminium | AL 5005 | Corrosion resistance and good processing performance. | The surface of this material is smooth with excellent texture, and it exhibits good anodizing effects. It is commonly used in applications such as conductors, cookware, dashboards, shells, architectural decorative components, interior and exterior building materials, and vehicle interior materials. |
| Stamping | 23 | Aluminium | AL 5082 | Good corrosion resistance, excellent weldability, and relatively good cold formability. | The main alloying element in this material is magnesium. It has good formability, corrosion resistance, and weldability, with moderate strength. It is used in the manufacturing of fuel tanks, oil pipes, instruments, streetlight brackets, hardware products, electrical enclosures, and more. |
| Stamping | 24 | Aluminium | AL 6010 | Good ductility, easy processing, and corrosion resistance. | This material's primary alloying element is aluminum (approximately 98.5%), with small amounts of other elements such as magnesium (Mg), manganese (Mn), etc. Its chemical composition is stable, and it possesses good physical and mechanical properties. It is widely used in aerospace, automotive manufacturing, electronic products, architectural decoration, and other fields. |
content is empty!
English
